Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
One power source, two switches
[ 2 Answers ]
If I have one power source coming in, do I just pigtail the black wire to the two swtches and wire nut the white wires together? Also do I pigtail the ground to the switchor just wire them all together?I am running 12-2 wire. And controlling two different light sources. Also on 15amp breaker,...
Tapping into a 2 prong outlet power source
[ 1 Answers ]
I am installing a new microwave in my mother's townhouse. The townhouse was built in the 60's. I can not tell if the outlet is grounded. All other outlets in her townhouse are two prong. Is there going to be a hazard tapping into the two prong outlet power source to provide power for the...
One power source to fan need dimmer for light only
[ 2 Answers ]
I have one switch to my fan junction box. Does anyone know of a remote that I can install in the junction box that will allow me to dim the light? I found one that will allow me to turn the light on/off (by Hampton Bay) and control the fan speed, but I need to control the light brightness.
Gfci power source
[ 5 Answers ]
I had and existing gfci power outlet. I had some remodeling done, and now I want to put a new gfci power outlet in. Does this power come off directly from the breaker panel, or can I use an existing power source?
Power Source For New Sconces
[ 4 Answers ]
I Have Two Sconces To Install. Where Can Draw Power From. They Must Be Wired To A Switch. Can I Draw Power From A Nearby Switch? If So Would I Just Run A Pigtail From The Existing Switch To The New One, Install Them Both In A Double Switch Box And Run A 14/2 Cable To Junction Box Splicing ... View more questions Search
|