Ask Experts Questions for FREE Help !
Ask
    atrager's Avatar
    atrager Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 2, 2006, 08:55 PM
    Hampton Bay Ceiling Fans
    Just bought a new Hampton Bay ceiling fan and it was installed by the contractor doing other work in our house. When the four (4) lights are on in the fan, after some time (one hr or so) the lights go off by themselves... also, if the fan is off, after a while it goes on by itself. The light is connected to both a remote and wall switch, the fan is too. Any idea what causes this?
    Thanks.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Sep 4, 2006, 12:00 AM
    Some other RF device in your area is on the same frequency. Change the dip switches. See:

    http://www.ceiling-fans-n-more.com/c...e-controls.php
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Sep 4, 2006, 12:00 AM
    Some other RF device in your area is on the same frequency. Change the dip switches. See:

    http://www.ceiling-fans-n-more.com/c...e-controls.php
    peteachmoran's Avatar
    peteachmoran Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Apr 14, 2007, 08:31 AM
    I have a Hampton Bay ceiling fan and when the concractor removed it, the screws and bushings for the fan blades were lost. Where can I get the replacement screws and bushings for the fan blades.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    Apr 17, 2007, 04:09 PM
    Home Depot sells packets of screws for fans, otherwise try to match them up at any good hardware store.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling Fans [ 8 Answers ]

The Hampton Bay Ceiling Fan information has been moved here.

Hampton Bay ceiling fans [ 1 Answers ]

We are installing two Hampton Bay ceiling fans on a cathedral ceiling in a two story great room. For efficiency purposes, do the fans need to be mounted on poles, or can they be installed tight to the ceiling?

Hampton Bay ceiling fans [ 3 Answers ]

I have a Hampton Bay ceiling fan purchased from Home Depot. The fan has a globe lamp just above the four light bulb outlets below the fan blades. My question is what is the best way to change the small light bulbs that have burned out inside the globe lamp? Do I have to take the whole fan down or...

Hampton bay ceiling fans [ 2 Answers ]

Does anyone know how critical it is to ground a ceiling fan? Is it OK to two wire it from a swag chain? Or will this electrocute someone?

Hampton Bay Ceiling Fans [ 1 Answers ]

I have installed two Hampton Bay 60" Industrial Ceiling Fans (Model # 158 987) on the same electrical circuit. Unfortunately, I had installed the circuit before I purchased the fans. I now find that the 4 speed fan switch is not strong enough to properly operate both fans. They spin on the two...

View more questions Search