|
|
|
|
New Member
|
|
Mar 17, 2009, 12:45 AM
|
|
Display Resoluation cannot change
Hi All,
I am Using Windows XP on my P4 system. System Specs are 1.7 GHz and 512MB RAM.
An error occurred in my Display Resolution, when I reinstall my XP on the system.
It has just selected 4-bits colors and the resoluation is set to lowest.
It donot allow me to change these settings. From troubleshooter of Windows, I go to advanced menu but the properties of monitor are diable and screen refresh rate is set to defualt and no other option is there.
Assist me.
Thanks in Advance.
Regards
Sheraz
|
|
|
-
|
|
Mar 17, 2009, 05:29 AM
|
|
Hello sheraz
The system seems unable to 'see' the display requirements, or your hardware is unable to provide or allow the required installation.
What type of display board has been physically installed? Is it also software installed?
If not : do you have the software to do so?
|
|
|
Ultra Member
|
|
Mar 17, 2009, 08:21 AM
|
|
Start, settings, control panel, system icon, hardware tab, device mgr
Under display adapters, what is listed there?
|
|
|
New Member
|
|
Mar 27, 2009, 11:16 PM
|
|
Originally Posted by seahwk83
start, settings, control panel, system icon, hardware tab, device mgr
under display adapters, what is listed there?
In device mgr no display adapter is there
|
|
|
Ultra Member
|
|
Mar 28, 2009, 12:41 AM
|
|
Do you have anything in device mgr that has yellow marks next to it? If so , which items specifically?
In control panel, click on display and go to Settings Tab and then the Adv button at the bottom
-now click the Adapter tab, what is listed there?
What model computer do you have?
|
|
|
New Member
|
|
Apr 1, 2009, 07:42 PM
|
|
If it worked properly in the past, restore the os to that state.
Help & Support > Tools > System Restore
|
|
|
Junior Member
|
|
Apr 9, 2009, 03:52 AM
|
|
Hi,
Try to install display driver and you can also restore your computer in back date when it was woeking fine.
Click on Start>All program>Accessories>System tools>System Restore.
|
|
|
Junior Member
|
|
Apr 9, 2009, 07:07 AM
|
|
Originally Posted by jamesbraken
Hi,
Try to install display driver and you can also restore your computer in back date when it was woeking fine.
Click on Start>All program>Accessories>System tools>System Restore.
The first part of this response is right, however JAMES and sreenivaspn81, you need to pay attention as the OP stated that they reinstalled Windows, therefore there is NOTHING for them to system restore back to.
|
|
|
New Member
|
|
Apr 16, 2009, 09:05 PM
|
|
Thanks Everyone, I have installed the drivers of my model and now everything is fine.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
A break is a change, and change is good.so why doesn't this feel good?
[ 7 Answers ]
Hi,
This is my first time posting on this site. I have read some of the responses, and I feel this site is full of very caring people. I'm just scared I'm going to get a little obsessed and check back too often.
First, my girlfriend and I have been dating almost 7 months. Doesn't seem like...
Last name change
[ 3 Answers ]
My fiancé has requested a last name change in the courts and we were waiting on the name change to get married. Then I heard that when you get married, whatever last name you sign the marriage certificate as becomes your legal last name once it is filed in the town clerks office. I wanted to know...
Minor Name Change/Birth Certificate Change
[ 2 Answers ]
15 year old minor, born in Marion County, Indianapolis, IN, living in WI with his dad, mom in FL--with joint custody, would like to change his name to his dad's and has both parents consent.
Does this have to be filed in IN? Are there forms that the parents can fill out and file without the...
Name change
[ 1 Answers ]
My biological father is not listed on my birth certificate, instead my sisters father is, my question is how do I go about getting this changed?
View more questions
Search
|