Ask Experts Questions for FREE Help !
Ask
    jgronquist's Avatar
    jgronquist Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2009, 01:23 PM
    Rtvscan hung - screensave locked. Any alternate to unplugging system?
    Do not want to power the thing down mid scan but it seems to be hung and the screensave is locked. The rtvscan is saying that "file.dll" is corrupted. When I click OK it goes to "file1.dll" is corrupted.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #2

    Mar 9, 2009, 03:31 PM

    Does it keep going up to file2 etc...

    Did NAV work before without problems?

    Is this something you have run before without problems?

    Do you know what may have caused issue?
    jamesbraken's Avatar
    jamesbraken Posts: 157, Reputation: 1
    Junior Member
    		  
    #3

    Mar 26, 2009, 04:36 AM

    HI
    It is look like spyware type and it should be remove from the computer.
    So, please update the anti spyware like super anti spyware and scan your computer in the safe mode.
    Then reboot your computer in the normal mode and if it comes in the start up then, go to the start , run, type the msconfig and start up then find out the file.dll entry and disable it.
    Helljack6's Avatar
    Helljack6 Posts: 107, Reputation: 8
    Junior Member
    		  
    #4

    Mar 27, 2009, 01:25 PM
    Quote Originally Posted by jgronquist View Post
    Do not want to power the thing down mid scan but it seems to be hung and the screensave is locked. The rtvscan is saying that "file.dll" is corrupted. When I click ok it goes to "file1.dll" is corrupted.

    This is an indication that the software itself has either become corrupt or the file is not present at all. Depending on the software, you can try to do a repair install which will correct this problem. IF a repair install is not available, you will need to uninstall the software completely, reboot and then reinstall the software.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does unplugging save energy? [ 14 Answers ]

Does unplugging appliances and TVs save significant energy as opposed to just turning them off? Which appliances would unplugging save the most energy?

Unplugging a clutch interlocking switch [ 3 Answers ]

Will unplugging a clutch interlocking switch on an acura integra prevent it from starting.

Rtvscan and svchost [ 1 Answers ]

RTVSCAN and SVCHOST are using 100% of CPU usage how can we stop

Unplugging the bathtub [ 8 Answers ]

Hello, can anyone help? We were painting our house and my wife washed the pan and the brushes in the bathtub. Now the bath tub is plugged... we have tried with Drano-gel(twice) and still doesn't work. The water is going down but it takes about an hour :-( not sure what else to do as the paint might...

Unplugging O2 sensor connector [ 2 Answers ]

How do you unplug the electrical connector from an O2 sensor on a 1997 civic DX? Not sure how the clip disengages from the mating connector.

View more questions Search