Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honeywell rth7500. Can't figure out wires
[ 1 Answers ]
I did a stupid. I took off the old non-progamable stat and didn't mark my wires. Here are the wires that I have. Red, yellow, blue, green, white and Orange. I'm not sure where they go. I have a Bryant furnace, heat pump and Air cond. This is a new house less than 6months old. Any...
Wiring a honeywell RTH7500 Programmable thermostat
[ 1 Answers ]
I am replacing my old thermostat a Trane BAYSTAT240A with a honeywell RTH7500 series one. There were eight wires on my old W- B- X2-Y-G-O-R-and a T. There is no spot to hook up the T wire although I got the unit to work. Right now the biggest problem is I can't read the display good because the...
Ruud Thermostat with honeywell RTH7500
[ 4 Answers ]
The old RUUD thermonstat wiring has G R B Y W2 X The honeywell Programmable has the following wiring. C AUX G E Y L
Rewiring from Weathertron Thermostat to Honeywell Thermostat RTH7500
[ 1 Answers ]
I am trying to replace our current Weathertron THermostat with a Honeywell. We have a heat pump with auxiliary heat and central airconditioning. All the wires matched except the Weathertron had a "T" wire and there is no corresponding connectiion that has a "T" on the Honeywell. I have the "B"...
Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems
[ 1 Answers ]
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)... View more questions Search
|