Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
1 1/2" black plastic drain pipe
[ 8 Answers ]
The 1 1/2" drain pipe on my neighbors mobile home was gloged. I had to cut the pipe at several places to remove the glogs. What type 1 1/2" couplings can be used to splice the pipe back together. Cpvc or pcv. (the pipe is black)
Tapping into 2" copper pipe
[ 5 Answers ]
In my basement, I'm putting in two laundry hookups. There is already a 2" copper pipe tapped into a stack that runs the length of the room, about 24'. There is one copper T (2", 1.5", 2") already welded into the 2" drain pipe and has a trap with 1.5" standpipe. I want to add a 2" along the same...
Connecting 2" copper pipe to 2" PVC
[ 9 Answers ]
I want to add a PVC standpipe for the washing machine and have the 2" PVC trap drain into an existing 2" copper DWV pipe. Would like to tap into the copper DWV pipe by cutting out a segment and putting in a PVC sanitary tee. I was hoping to use a shielded coupling to connect the top and bottom...
How do I "connect 1/2" copper to 1/2" flexible plastic"? Anyone?
[ 5 Answers ]
Hello Experts... Amateur (very amateur!! ) plumber needing some advice: Bought an old 2 1/2 storey house, and somebody ran some copper into the uninsulated side attic to feed the hot & cold water to a sink. This might not be a problem in California, but it sure is North of the border in...
Connecting 1 1/2" ABS to 1 1/4" pipe
[ 4 Answers ]
Can I trust a flexible fitting to connect 1 1/2" ABS to existing 1 1/4" pipe, which is sold in the retail outlets for a closed wall bathroom drain? Do these flexible connectors with torque down clamps provide durable connections that will last without leaks? View more questions Search
|