Ask Experts Questions for FREE Help !
Ask
    sparkplug24's Avatar
    sparkplug24 Posts: 8, Reputation: 0
    New Member
    		  
    #1

    Feb 28, 2009, 08:29 PM
    Sprocket change for feet per min.
    I have a drive roll that needs to turn 500Ftm min.. It now turns at 420Ft.min.
    The drive shaft FPM is 61
    The drive shaft RPM is 120
    The drive sprocket has 24 tooth
    The driven shaft FPM is 120
    The driven shaft RPM is 245
    The driven sprocket is a 10 tooth
    :confused:
    sparkplug24's Avatar
    sparkplug24 Posts: 8, Reputation: 0
    New Member
    		  
    #2

    Feb 28, 2009, 10:53 PM

    It is 28 to 10 tooth.. quit second guessing yourself
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Genie Garage Door Opener - Gear and Sprocket [ 4 Answers ]

We have an old genie model SP99 garage door opener. The motor stills works, the plastic gear still turns but the door will not open or close without assistance. Could the chain sprocket 'slip' when the gear is turning? When giving assistance the chain does move down the track like normal to it's...

How to put the chain on the sprocket [ 2 Answers ]

On my overhead Garage door opener, the chain has come out of the sprocket. I can see how to put it back, but not able to pull it with my hands to put it over it, does anyone know of any tools which will help me do that. Or is there a trick in doing that. Thanks

Square Feet Board Feet? [ 4 Answers ]

If I know how many square feet I have and I know the thickness of the material I have how I convert these values to square feet?

View more questions Search