Ask Experts Questions for FREE Help !
Ask
    joinitnow's Avatar
    joinitnow Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2009, 08:50 AM
    Oil furnace trouble
    I bleed my oil valve on my furnace and only a little of oil came out. The furnace did not start I tried to bleed it again and nothing comes out. Any suggestions
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Feb 24, 2009, 11:47 AM
    Is the burner running while you attempt to "bleed" the pump? Is your fuel tank/supply line located outdoors?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace trouble [ 1 Answers ]

My coleman furnace heating coils heat (get red) and then go off and come on go off, I don't see no breaks in them what could cause this? Thank you.

Furnace trouble! [ 5 Answers ]

I am new hear forgive me if this is not posted correctly but I am about to take a wrench and whack the heck out of my furnace!! Here is the history (briefly at any rate) Two days before Thanksgiving we finally decided to turn her on she is 12 years old, I believe the brand is Valiant (?) well she...

Furnace trouble [ 1 Answers ]

My beach 68/70 oil furnace cuts in and out 4or5 times after the cycle an sometimes will keep running

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

View more questions Search