Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
TV doesn't recognize VCR/DVD combo
[ 5 Answers ]
I bought a small LCD HDTV and hooked it up to my DVD/VCR player but the TV does not seem to connect to it because it always says no signal. I have all the wires that are supposed to be connected from one to the other but I can turn the DVD/VCR player off and the TV will still work wthout it, not...
Is this d right combo?
[ 2 Answers ]
First time here and not sure how this works! Will try to add as much info as possible. An HVAC installer that was referred to me by a friend gave me an estimate last Saturday on replacing my 27 y.o. furnace and 8 y.o. outside unit. This is the third estimate and least expensive. The installer...
Using DVD/VCR combo as tuner for old TV
[ 1 Answers ]
I have an older television, early 90's, and am using a DVD/VCR combo as a tuner to pick up higher stations. The problem is even though the coax appears to be wired correctly when I attempt to use the remote from the DVD/VCR to change channels, even though the tuner shows the channel advancing, the...
Combo box script
[ 2 Answers ]
I was wondering if anyone has or knows where I could get a script for combo boxes that alows me to go about 6 levels in but select earlier if needed and also boxes only appears if previous box has been used.
Is there any way to do this 3-way combo?
[ 2 Answers ]
G'day guys. I'm attaching a diagram of what I have. Power comes to the box at the back wall in my kitchen. From there I have one switch to control the back porch light, and a 3-way switch that controls the kitchen lights. On the other wall, adjacent to the dining room, is the other 3-way... View more questions Search
|