Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fan Blower not working in "ON" or "AUTO" in heat or AC
[ 13 Answers ]
Got home from the Brewer game this afternoon and noticed the house was warm(78). Outside was 91. I checked the T-stat and it was set correct. Noticed the air vents weren't blowing anything. Went outside and the condenser and fan was running fine. Then I went downstairs to the furnace unit to see...
A/C or Heat does not work w/thermostat set "on" or "auto".
[ 22 Answers ]
A/C or Heat doesn't work in "on" or "auto". Fan will not come on at the "on" position either. I changed the batteries in the thermostat. I also read somewhere to disconnect the "Y" and hold it to the "R" on the thermostat for two minutes. That will tell me if the thermostat is the problem. ...
Thermostat Wiring -- Where to put "O" wire if I have no heat pump
[ 1 Answers ]
I'm trying to replace an old Dayton thermostat (Model 2E137) with a newer Honeywell (either the 6300B or the 7400). I have a Bryant 80 furnace in the basement and a Bryant Quantum Plus 550A air con outside. The Dayton thermostat has wires going to six terminals: R, 4, Y, W, G, and O I know...
Rheem heat pump thermostat "EM" setting
[ 1 Answers ]
I have a Rheem model no. RHQA 1000B heat pump, but previous homeowner left no manual for it. I am puzzled at the "EM" setting on the thermostat. I would also like to download/obtain an operation manual for this unit.
03 Honda Civic "maint. Req" light blinking
[ 2 Answers ]
The "maint. req" light blinks like 10 times when I start the car, it does not remain on but it does it every time I start the car. It has done this once before, and I do not remember how to make it stop. And since it has done this before, what is the cause? Any help is appreciated!... View more questions Search
|