Ask Experts Questions for FREE Help !
Ask
    rockyr's Avatar
    rockyr Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2009, 02:23 PM
    Funace parts
    Were do I get parts for a wesco furnace model wcg at serial 11281 twenty five years old.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 9, 2009, 04:46 PM
    You probably will not be able to locate parts for the old Wesco. There has been many posts here and on other boards about this problem. I have searched all over for parts and none are available. They also used a special ribbon type heating element so the standard replacements available for other brands will not work either. If you ever find a place that has the parts please post the company and phone number because folks doing a Google search or other search will be glad to know they are available
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas funace/ac [ 2 Answers ]

Wiring schematic

Two thermostats one gas funace [ 3 Answers ]

I would like to use 2 thermostats on one gas furnace. One for the gas furnace and the other thermostat to control just the blower on same gas furnace? Then put in an out door wood boiler with hot water heat in same gas furnace. 4 wire heat cool. I have a Lennox G61MP series. Need to know how to...

Aircondition not running and funace not on [ 9 Answers ]

Hi All, I came home today and the I discovered the air conditioner is not working. The symptoms are that the furnace indicator lights are not on which might indicate the furnace is not getting power. The blower does not turn on when the thermostat is sending a signal. Also, the outdoor AC unit...

Current Limit for funace accessories [ 1 Answers ]

I've got an Air Ease furnace Mfg by Lennox. P/N G1D91Au. I've already connected a humidifier to the 120V HUM terminals on the blower control board. Also, I would like to add a couple of duct boost fans and wire to the blower control board. I could use the 120 V terminals for the Electronic Air...

Funace stops kicking on [ 3 Answers ]

Hi I am having problems with my furnace. It is a Pulse and is only about 7 or 8 years old. The problem is, is that it works for a while and then it will NOT kick on again. If you turn the power off at the thermostate it will come back on and will work again anywhere from 4 to 10 hours before it...

View more questions Search