Ask Experts Questions for FREE Help !
Ask
    boranjmmt's Avatar
    boranjmmt Posts: 16, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2008, 08:01 PM
    Kenmore gas dryer model #md4207586 - no heat
    Drum turns. Ignitor replaced. No flame. Is there a heat element or coil in a gas dryer? Should I be looking for a flame near the ignitor?
    Thanks for any suggestions.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 29, 2008, 10:41 PM
    I assume the gas is turned on?

    There are coils on the gas valve that do go bad,naturally the timer also controls the gas valve so it could be various other parts. If you have a meter and know how to use it there is a wiring diagram somewhere on the unit that will show the electrical path for the burner and the rest of the dryer.
    boranjmmt's Avatar
    boranjmmt Posts: 16, Reputation: 1
    New Member
    		  
    #3

    Dec 30, 2008, 05:23 PM
    Thank you. I will use your suggestions.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer Model # 110.96591220 Won't Heat [ 5 Answers ]

Dryer won't heat and I have continuity on all the reachable parts. Not getting juice to the coil during operation. I should have 0.00 OHMS for normal operation, tested when cool on all the parts, right? Thanks for your help.:eek:

View more questions Search