 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a multi-zone (5) HWBB heating system attached to programmable thermostats. The thermostat has a "cycles per hour" setting. What does this do, and what should I set it to? It's currently set to "3" on all thermostats.
My gas furnace is approx. 30 years old. The furnace will run one cycle, shut off and approx. 15 seconds later run again for a shorter period. Everything is working properly, heating correctly etc. but runs two cycles. Any thoughts on why?
When the outside temp closes in on the thermostat set temp ( at night ) the ac will cycle on but the blower will try to start then turn off. It cycles like this for a number of times before finally overcoming the issue and then it will run normally. If during this cycling I move the thermostat to...
The heatpump works but the blower has problems. When the fan is put to "On", or when the system is initiated by the thermostat, the blower sometimes will try to start, but cycles on/off. I can hear the relay clicking. When the system does operate correctly the problem will eventually re-occur....
Any changes in menstrual cycles such as clotting, and unusually heavy bleeding can be indications of serious problems, no matter what age, so please see your family physician. Please take your body serious and watch for signs. Check this page for possible or probable causes of changes in your...
View more questions Search
|
