Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Blower runs on auto & on for AC, but only on for heat
[ 1 Answers ]
I had my blower replaced this summer & it runs well for the AC... when I turned the heat on it only works when it is in the on position, not auto... the themostat I have is programable:(
Blower will only work in Heat, not Fan-On or Cool-Auto
[ 3 Answers ]
Hi, I have a York system about 10 years. Its control board keep giving me problem. Most last year was the connection problem of the socket where the t-stat's 4 wires go in. I finally soldered a fly-wire for the W for heating issue last winter to fix it. Now, the summer comes and the cooling is...
Blower won't come on in auto mode. Heat only
[ 2 Answers ]
Carrier 48SB-030080301 1990 model nat gas. On a/c mode works fine. Heat- burner lites but blower will not come on at all unless on manual. I changed the J2 jumper on thermostat from hg to he to see if I could get by for a while and its been working for about a month now. Other than blast of cool...
Why won't the thermostat will run heat on auto ?
[ 1 Answers ]
My unit will not heat up and it will not on auto
Blower won't run in auto for heat with oil furnace
[ 9 Answers ]
I have an oil furnace. A/C works fine. Heat last season worked fine. Started up furnace this year just fine. But blower would not start on auto. The blower will run in heat mode when set to On. I replaced the Limit Switch in the Plenum. No change. View more questions Search
|