Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting to 1 1/2" copper drain with pvc kitchen sink drain trap
[ 8 Answers ]
I'm trying to rehook up the kitchen sink pvc trap to the old copper drain pipe but the connector doesn't fit tight enough and the water links out. Any ideas how to stop this leak?
Relocating Sink Drain/Vent to Dedicated Stack Serving Kitchen Sink & Dishwasher
[ 3 Answers ]
I am relocating an upstairs vanity sink from one wall to another (also going from single to double bowl). Rather than relocate the drain and vent pipe, I am hoping that I can tie into a 1-1/2" copper vent pipe that is located right behind the vanities intended location. The copper vent pipe is from...
Hooking a Utility Sink in basement to Kithcen sink drain
[ 2 Answers ]
I'd like to install a utility sink in the basement and have attached a drawing illustrating the current piping and proposed attachment. Basically, the kitchen sink drain goes directly into a drain in the basement floor via a 1-1/2" steel pipe, which is tied to the sewer system. I'd like to put a...
Outgoing Drain Behind Vanity Cabinet Not Aligned with Sink Drain Tube in New Sinktop
[ 1 Answers ]
I'm installing a new vanity cabinet and new marble vanity top, both slightly larger than the originals. The problem we've encountered is that the drainage pipe that will exit sink water from the sink to the house -- the PVC pipe in the house/wall -- is not aligned with the new location of the sink...
Kitchen Sink/Laundry Sink Drain Vent Non-exist
[ 3 Answers ]
The set-up from kitchen sink leading down to drain to basement: 1. Kitchen sink - (R side) - connected to a P drain I think you call it -PVC-, connected to a "metal" T, which has a Studer vent gizmo attached to the top of it, then draining into a metal pipe straight down to the drain in the... View more questions Search
|