Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Leaking shower handles
[ 3 Answers ]
My hot water shower handle leaks constantly but especially when you take a shower, allowing hot water to run down the wall to your feet so your feet get a toasty shower to say the least. There is only one screw to remove from the handle, but I can't get the handle off. Can anyone tell me how to get...
Replacing shower/tub slip on spout
[ 4 Answers ]
I replaced the shower/tub slip on spout, but there is water leaking from the back of the spout and the wall. What am I doing wrong?
Connector for NPT connection on shower, slip fitting or not?
[ 5 Answers ]
I'm installing the shower valve. Is it better to use a threaded slip fitting, or just a standard non-slip type? My worry is if I don't tighten the non-slip type enough, it will leak and I won't be able to tight anymore without undoing all the plumbing.
Shower handles
[ 1 Answers ]
Hi, I need to replace my shower handles which are very old and cruddy. They are held on by one screw and there is a cap that goes over the screw, indicating hot, cold, and diverter. I tried to unscrew them and pull them off, but they are really stuck and one of them I could not even unscrew the...
Handles for shower broken
[ 2 Answers ]
The handles on the shower are broken. There is cold water running constantly. The center piece on the cold valve is broken off and the handle is off the hot water. There is a metal cover that is over top the handle that sits on the tile wall and had caulking around it. Do I need to remove this to... View more questions Search
|