Ask Experts Questions for FREE Help !
Ask
    DB1833's Avatar
    DB1833 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2008, 11:01 AM
    Cant get cold water in sink to shut off using handle
    I replaced faucet and turned on main h20 valve then turned handle for cold water on and it went on but when handle is turned in off position it still comes out
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 19, 2008, 11:52 AM
    One handle or two knobs? What's the name and model number? Back to you, Tom
    DB1833's Avatar
    DB1833 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 21, 2008, 08:51 AM

    speedball1 the faucet is delta although I don't have a specific model it is similar to Orleans Centerset Bath Faucet : Bath Products : Delta Faucet cenerset it has separate handes for the hot and cold water
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #4

    Nov 21, 2008, 09:46 AM

    I would return it back to the store for replacement it is under warrant, other wise close the angle valve remove the stem turn on the water for a few seconds to flush out all the debris close the valve check inside for an debris remove if any, assemble the faucet and check if it works, good luck.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot water coming from cold side tap even though hot water supply shut off [ 2 Answers ]

Hi I been having problem for past year now hot water comes from the cold side tap, I only have 1 tap that shares water hot and cold the other 2 I have are 2 separate hot cold and 2 are just cold taps now I have even shut the cold water supply to the hot water tank off, but yet when I run the...

No water, 2 handle sink [ 2 Answers ]

Hi, I've a 2 handle kitchen faucet. Recently it became erratic and you had to play with one of the handles in order to get water. Now there is no water from either handle or veggie sprayer. I've disassembled the spigot and it is free all the way to the base of the assembly. Is there anything...

TUB water shut off handle installation [ 1 Answers ]

HELP! I need to install handles on water supply shut-offs for the tub before I can sell my place - buyers insist. There are two small bits of pipe sticking out from the wall in the closet in front of the tub. They are straight, about 2 inches, have square ends, heavily painted over. Previous...

Water dripping from angle shut-off valve handle [ 3 Answers ]

I have limited plumbing knowledge so pardon the question if foolish. I have a leak under a bathroom sink that has double shut-off valves (h&c). On the hot side the leak seems to be a drip from the shut-off valve handle. The shut-off valves attach to grey plastic supply lines and are secured by what...

Cold water handle moves on its own [ 3 Answers ]

Have a two handled faucet in a clawfoot tub. Pressure is fine for both hot and cold, however when the shower is running the cold water knob slowly moves toward the closed position. In otherwords, the handle actually moves on its own. You have to continually open it back up in order to keep your...

View more questions Search