Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Selecting Replacement Heat Pump/AC
[ 2 Answers ]
I'm in process of selecting a replacement Heat Pump/AC for my 35 year old home. 2400 sq ft. one level. Panhandle of Florida. Current unit was a Lennox, installed approximately 20 years ago and now the compressor is making some strange noises but still cooling OK. I'm looking at possibly having...
A/c(heat pump)smells after thermastat replacement
[ 1 Answers ]
I have a rheem heat pump and recently changed the old thermastat to a honeywell 7400 programmable... everything seems to work fine, but since the change I have noticed a distint smell (sulphur/ozone?) anyone have any suggestions? Wondering if I may have a wire incorrectly installed?
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Why does my air handeling coil freeze up when the heat pump is in heat mode?
[ 3 Answers ]
I have a TRANE XL 1200 heat pump. When in the heat mode the air handeling coil freezes up, enough to block the air flow. I can turn the heat pump off and leave the air handeling unit air circulating fan on and get the ice melted. After 30 minutes or so I can turn the heat pump back to the on...
Trane Heat Pump tstat replacement with Honeywell prog - wiring question
[ 1 Answers ]
I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -... View more questions Search
|