Ask Experts Questions for FREE Help !
Ask
    chas gibson's Avatar
    chas gibson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2008, 03:11 PM
    Turning on furnace fan
    I recently installed an outside wood furnace,with the rad in my oil furnace. I would like to be able to turn the fan on upstairs with a switch or another thermostat. I currently have a honeywell ct51 thermostat with 2 wires. There is an auto and manual switch on this thermostat but only works with the oil furnace. Auto
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Nov 1, 2008, 07:35 PM
    Your going to need more than two thermostat wires and maybe a new or extra thermotat to add a isolation relay for your two heating systems.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fan/Furnace not turning on [ 5 Answers ]

Problem started last night. Before bed I went to turn the temp down on the thermostat. I got the clicking sound from the thermostat indicating that it was sending a connection to the fan. No fan turned on. I went above the desired temp and it clicked again. Back down below and again another click....

Furnace not turning on. [ 2 Answers ]

Hi there. New to this but here goes. I have a Rheem RGMC-125A propane furnace that is 24 years old. Never any problems till this winter. Is has a constant pilot flame. We lit the pilot and it works properly. When we turn on the thermostat, it clicks but nothing turns on. The burners do not...

Blower on furnace turning off and on [ 7 Answers ]

The blower on the furnace (HEIL SP 80) keeps shutting off and on during the cycle it would be blowing. The normal cycle appears to be working but when the blower turns on it keeps shutting off and on. Does that make sense how I asked the question?

Blower on furnace turning off and on [ 1 Answers ]

The blower on the furnace (HEIL SP 80) keeps shutting off and on during the cycle it would be blowing. The normal cycle appears to be working but when the blower turns on it keeps shutting off and on. Does that make sense how I asked the question?

Gas furnace not turning on [ 1 Answers ]

I've replaced the thermostat but my old one was so dated I couldn't see any significant number settings e.g. anticipator setting. What's that?

View more questions Search