Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Craftsman riding mower stalls on turns
[ 7 Answers ]
I have a Craftsmen riding mower about 6 years old on tight turns it backfires and sputters, almost stalling. It sometimes does the same on unlevel ground. It continued to do this even after I changed the plug and fuel filter. I just find it odd that turning the wheel tight would cause this to...
Drive System Craftsman Riding Lawn Mower #917273320
[ 1 Answers ]
Hydrostatic (?) drive will not engage. Belt is running but will not move in either direction. The only thing noted is that the trans release will not release or only partially release. The drive just quit, no slipping or mechanical noise.
12.5 hp B&S riding mower stalls under load
[ 2 Answers ]
I am a novice mechanic. My 12.5 b&s (Murray) was leaking fuel from the carb. I put in overhaul kit for Nikki carb. Solved fuel leak. Now mower only runs when holding in clutch. Engine stalls when release clutch to engage drive belt. Thanks for your input. View more questions Search
|