Ask Experts Questions for FREE Help !
Ask
    rocket5150's Avatar
    rocket5150 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 28, 2006, 04:49 PM
    Hampton Bay ceiling fans
    I have a Hampton Bay ceiling fan purchased from Home Depot. The fan has a globe lamp just above the four light bulb outlets below the fan blades. My question is what is the best way to change the small light bulbs that have burned out inside the globe lamp? Do I have to take the whole fan down or is there a way to loosen the ring at the top of the globe and get to the light bulbs from there? The globe is too close to the ceiling to get a screwdriver in there so I would need to unlatch the screws. What is the best way to do this? Thanks for your help.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    May 28, 2006, 05:11 PM
    What model fan do you have?
    rocket5150's Avatar
    rocket5150 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 28, 2006, 05:26 PM
    Quote Originally Posted by ceilingfanrepair
    What model fan do you have?
    Not sure what model it is. Is there a location on the fan that lists it?

    The model that I have has three chains on it. The middle chain turns the light on below the fan blades, the left chain turn the fan on and off and the right chain turns on the lights inside the dome above the fan blades.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    May 28, 2006, 05:51 PM
    It does because otherwise I have no idea what fan and glass you're talking about.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling Fans [ 8 Answers ]

The Hampton Bay Ceiling Fan information has been moved here.

Hampton Bay Ceiling Fans [ 4 Answers ]

Just bought a new Hampton Bay ceiling fan and it was installed by the contractor doing other work in our house. When the four (4) lights are on in the fan, after some time (one hr or so) the lights go off by themselves... also, if the fan is off, after a while it goes on by itself. The light is...

Hampton Bay ceiling fans [ 1 Answers ]

We are installing two Hampton Bay ceiling fans on a cathedral ceiling in a two story great room. For efficiency purposes, do the fans need to be mounted on poles, or can they be installed tight to the ceiling?

Hampton bay ceiling fans [ 2 Answers ]

Does anyone know how critical it is to ground a ceiling fan? Is it OK to two wire it from a swag chain? Or will this electrocute someone?

Hampton Bay Ceiling Fans [ 1 Answers ]

I have installed two Hampton Bay 60" Industrial Ceiling Fans (Model # 158 987) on the same electrical circuit. Unfortunately, I had installed the circuit before I purchased the fans. I now find that the 4 speed fan switch is not strong enough to properly operate both fans. They spin on the two...

View more questions Search