Ask Experts Questions for FREE Help !
Ask
    hoffy3177's Avatar
    hoffy3177 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 22, 2008, 01:31 PM
    How to replace damaged old wood casement windows with a vinyl casement window?
    I have very old Pella Wood interior casement windows where the sashes are starting to sag. I want to replace them with a vinyl casement window, but I don't know how to get rid of the old hardware in order to put in a vinyl casement window. I have vinyl siding with j-channel applied to the siding. Can you please tell me the best way to get rid of the old window and be able to put the new vinyl window in?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Sep 22, 2008, 05:20 PM
    I use a Sawsall or reciprocating saw to cut alone the 4 sides. Use ablade made for wood and metal.
    hoffy3177's Avatar
    hoffy3177 Posts: 2, Reputation: 1
    New Member
     
    #3

    Sep 23, 2008, 09:19 AM

    Are you saying use a sawsall and cut the nailing fin from the outside, take the nails or screws out of the frame and pull the window out?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Sep 23, 2008, 09:23 AM
    Pretty much. The window is just slightly smaller than the opening and was shimmed and mechanically attached with nails or screws. I could spend hours trying to pull nails but they are often hidden so cutting around the window with a reciprocating saw is quicker. It would be another matter if you plan to reuse these windows eslewhere.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement or repair of casement windows [ 18 Answers ]

Our house is in need of replacement or repair of several casement windows. I'm looking for information on quality contractors in the Wichita, Kansas area. If not specific contractors, things to look for in contractors. I am extremely suspicious about most contractors and it is very difficult to...

Fire damaged residential floor joists-how do I replace? [ 2 Answers ]

I have 22 joists to replace over my basement,please advise which is the safest way to go about this,I'm very good with carpentry, but I've never replaced joists,just sistered to existing,please advise.

Wood vinyl floors [ 2 Answers ]

I have vinyl wood floors and I mop them 2 times a day and they use to be shinny but now they have a white gloss over them and no matter how much I mop them or scrub them it doesn't go away what can I do to fix this problem cause it is making me feel like my floors are dirty when I know that I mop...

Remove & replace an existing vinyl liner [ 2 Answers ]

A woodchuck burrowed beneath my 16x32 rectangular pool with a vinyl liner. The ground below the pool floor has suck where the burrows are and I now have pot hole like ruts about 6-10 inches deep on the pool floor. Can I remove the water and pull back the liner, repair the ground and get the liner...

Need to know how to Replace a termite damaged beam in basement. [ 2 Answers ]

Need to know how to remove a damaged termite damaged beam in basement wall stud.


View more questions Search