Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Installed Honeywell RTH3100C and A/C kicks on after a few minutes of heat
[ 8 Answers ]
I have a single stage heat pump. Electric. I'm not sure what I have done wrong. I have the following wires: Yellow White Red Green According to the installation manual, I have installed them in the following locations:
20 yr old Lennox heat pump fan blows constantly in heat mode
[ 5 Answers ]
20 year old Lennox heat pump - outside temps been 30's at night, 40's daytime UPDATE: I went outside and the unit is covered in frost on 3 sides! I've been reading on Google about frosted heat pump units and can't determine how to manually defrost it. Apparently, the auto defrost is not...
Installed new Noma thermostat 52-2570-6 heat stays on
[ 2 Answers ]
I bought this Noma thermostat and the heat stays on, no matter what. Even if I detach the front plate the heat remains on. When I reinstall the old mercury swtiched thermostat it works fine. I have a 2 wire hydronic heat system. Can anyone tell me why the heat stays on? Any advise will help....
Ductless A/C with Heat Pump - Heat pump does not come on
[ 1 Answers ]
Hi The A/C works great but in the morning when its cool outside and I switch on the Heat the indoor unit makes a clicking sound and the fan stays off - after about 8 minutes I switch to A/C I get a rush of ice cold air along with some mist. Seems like when I switch to heat the indoor unit... View more questions Search
|