Ask Experts Questions for FREE Help !
Ask
    schriverj's Avatar
    schriverj Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Sep 3, 2008, 12:51 PM
    f4 error code on whirlpool gold catalyst washer
    Now I have an F4 error code. Can anyone tell me how to fix this and re-set the washer so I can use it again.
    jdavid's Avatar
    jdavid Posts: 7, Reputation: 2
    New Member
    		  
    #2

    Sep 21, 2008, 08:56 AM

    I also have an f4 code which then changed to an f3 code The catalyst won't start agitation.I unpluged the machine for two min. to reset but to no avail
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Gold Catalyst Washer problem [ 15 Answers ]

Hi My model number is GSX9885JQ0 The washer will fill with water but doesn't agitate. The light on the control panel blinks instead of being on solid. It doesn't display an error code on the panel, just shows how much time is left. I also tried unplugging and letting it reset. I also tried using...

Whirlpool Gold Catalyst washer error message [ 6 Answers ]

Whirlpool Gold Catalyst washer stops running and displays an error code of F3 or F4.

Whirlpool gold catalyst error code LD [ 3 Answers ]

My washer was flashing LD in the display panel. I tried to re-start the washer but it won't do anything. The timer is counting down as if it is running through the cycle, and the light above "wash" is flashing. Does anyone know how to re-set the washer so I can continue doing laundry. Keep in...

Whirlpool Gold Catalyst Washer remove the top [ 1 Answers ]

How do you remove the top of a Whirlpool Gold Catalyst Washer? There is a hose that connect at the top that is leaking.

Whirlpool Gold Catalyst Washer [ 3 Answers ]

This was our FIRST Whirlpool washer/dryer set and our LAST!! How does one remove the control panel?

View more questions Search