Check out some similar questions!
Carrier Weather Maker 8000 flame sensor
[ 10 Answers ]
Hello, I have a Carrier weather maker 8000 and have received error 34. I would like to find the flame sensor so that I may clean it but don't know what it looks like. I have surfed the site and am unable to find it. Can anybody help with this. Thank you in advance, TripleT
Carrier 58MSA, code 34, flame proving sensor?
[ 7 Answers ]
Wanted to know if anyone could help me troubleshoot this problem.. This furnace will not fire up, basically what happens is the igniter lights up, but will shut down after a 5 seconds or so. It will do this three times until it goes into lock down mode for three hours, and then flashes code 34....
Carrier 58SXA Furnace Ignition Problems
[ 5 Answers ]
I have a 16 year old Carrier 58SXA furnace that has had problems igniting on colder and damp days for many years. Pilot, lockout device and board, fan board, and thermostat have been replaced, to no avail. Simply resetting main power supply to furnace temporarily solves problem. Pilot ignites...
Furnace flame sensor ignition module ?
[ 3 Answers ]
Seasons greetings, My church recently received a used furnace when the t stat calls for heat the ignitor starts to glow after about 30-40 sec. the furnace lights and then after a few seconds the burners go out we recently changed the ignition module which is a white rodgers 50e47-843 after this... View more questions Search
Add your answer here.
|