Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My shower stall has a three inch busted place on the strip that secures it to the 2x4
[ 1 Answers ]
I am having a home built and my foreman said that it is common to have the strip that you use to secure the shower stall to the wall break off and that there are no future consequences. It is screwed in and flush, there is just a three inch piece busted off. It worries me that water could get under...
Adding a second shower head to shower stall
[ 4 Answers ]
I'm trying to add a second shower head to a shower stall in the basement. What do I need to do to make sure an equal supply of water at the same temperature runs to both heads. I tried to just run a line from the first shower head to the next but that doesn't work.
Looking for 30 inch square stall shower
[ 4 Answers ]
Does anyone know of a plumbing supply house where I can buy a 30 inch square stall shower with removable walls to replace one installed in 1970? Thank you. hshields
Shower stall need height of controls and shower head
[ 1 Answers ]
Hi Am building a shower and require the height of the taps and the shower head
Turning walking shower stall into bathtub/shower combo.
[ 4 Answers ]
Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line... View more questions Search
|