Ask Experts Questions for FREE Help !
Ask
    neil88's Avatar
    neil88 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2008, 02:27 AM
    Fan not working
    My system is working outside, but the fan will not cut on inside. The system is a trane heatpump system.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Aug 2, 2008, 07:36 AM
    Could be

    A bad fan capacitor

    A bad fan motor

    A bad fan relay

    A bad circuit board.

    Incorrect wiring or defective wiring.

    A defective blower door switch if so equipped

    You will need a meter to take voltage readings
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I got a job working for company in Maryland but I will be working in SC at home. [ 8 Answers ]

Hi, I just got a job working for a company in Maryland, yet I will be working remotely at my home in South Carolina. I will be flying up to Maryland maybe once every month or so for a couple of days to show my face. Will I be filing both SC and MD state taxes. I've never done this before so...

Heat and Air not working on Attic unit, but blower working. [ 1 Answers ]

The blower is working fine on our Heating and Air Conditioning unit but neither the Air or Heat will work. The emergency Heat works fine though. The unit is a Carrier with the words American Standard written on the outside fan unit. What should I look for before calling a tech or what would this be...

Previously working electrical outlets stopped working [ 2 Answers ]

Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...

View more questions Search