Ask Experts Questions for FREE Help !
Ask
    Randyw1's Avatar
    Randyw1 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 31, 2008, 06:17 PM
    Possible Issue with Lift Station
    My pipes are clogging up and I went out and checked the clean out. It was backed up there to. I rented an Electric snake and ran it as far as I could. I think I hit a 90 and it would go no further, but I'm not sure.

    I know it was heading to the Lift Station, that pumps to the City pipes. There is a vent for the lift station, and there is what appears to be tiny pieces of toilet paper and some excrement laying in under the vent.

    I'm not a plumber nor a genius, but I'm guessing my problem is the Lift Station at this point. Any suggestions?

    Thanks.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #2

    Jul 31, 2008, 07:55 PM
    If your clean out is overflowing, the blockage is somewhere between Clean Out and Street. It should be relatively easy to find out if your "Lift Station" accepts sewage or not.

    I guess, the "90" you've hit is not a 90, but the actual blockage. You have to know how to use power snake. For your 4" main, you should use 3/4" self-feed snake. Once you hit the blockage work it back and forth many times until the tip of the cable cuts through. If you have roots, use root cutting tip. If you have sludge, use heart shape tip. Once unblocked, run the snake couple more times. Always run lots of water through it using garden house.
    Randyw1's Avatar
    Randyw1 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 31, 2008, 09:18 PM
    Quote Originally Posted by Milo Dolezal
    If youe clean out is overflowing, the blockage is somewhere between Clean Out and Street. It should be relatively easy to find out if your "Lift Station" accepts sewage or not.

    I guess, the "90" you've hit is not a 90, but the actual blockage. You have to know how to use power snake. For your 4" main, you should use 3/4" self-feed snake. Once you hit the blockage work it back and forth many time until the tip of the cable cuts through. If you have roots, use root cutting tip. If you have sludge, use heart shape tip. Once unblocked, run the snake couple more times. Always run lots of water through it using garden house.
    Thanks. I am going to look at it again in the morning. I haven't opened the Lift Station yet. I am going to do it in the morning. I can run the snake from there in the direction it needs to go. I can attack it from the opposite side this time.

    Thanks again.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water lift pump station [ 2 Answers ]

How to design a single water lift pump station?

Can't lift over 10 lbs! [ 3 Answers ]

All right - I desperately need a job and I'm 6 months pregnant. I am not able to lift over 10 lbs due to a bicornuate uterus.. my doctor just doesn't want anything to happen to me. I have a very healthy pregnancy besides that though. Question being.. what kind of job could I do to make decent money...

Lift station [ 1 Answers ]

I am insalling a lift sation on a one bedroom cabin. 3in intake with 2in discharge . Do I vent where it goes into the lift or the 2in dischrge out to the septic tank. Thank you Luis

Gas Station [ 1 Answers ]

How do I go about starting a Gas Station with a business plan & all?

Docking Station/Monitor Issue [ 1 Answers ]

Hi. I use a laptop with a docking station and when I shut down, I get a black screen and a white flashing cursor in the top left hand corner. Any assistance will be appreciated.


View more questions Search