Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How To Avoid Dust When Sanding Wall Board Joints After Spackleing?
[ 1 Answers ]
I have repaired some wallboard joints and paint peeled areas with wallboard compound and now want to sand these areas smooth. I would like to know if it is possible to do this dust free after the wallboard compound has dried?
Roof/wall joints
[ 2 Answers ]
Is it true a flashing kickout at the bottom edge of the roof/wall joint is used to help keep water from getting behind the stucco or siding.
Copper joints under non-removeable sub-floor
[ 1 Answers ]
Hi! We are plumbing a new bathroom with 1/2" copper. A friend advised me to avoid joints in the copper under the sub-floor where they could not be accessed if they leak. (The sub floor will have tile over it when finished). My plumber says this should not be a concern and we can have a 'T'...
How to fix basment wall leaks
[ 2 Answers ]
I have water coming into my basment through the walls. Mainly where the wall meets the floor. How can I take care of this problem.
Basement wall leaks when toilet flushes
[ 2 Answers ]
We live in an OLD farm house with a stone basement. Whenever we flush the toilet the basement wall leaks. It is clean water. Any ideas what the cause is and how to fix it? View more questions Search
|