Ask Experts Questions for FREE Help !
Ask
    laddie626's Avatar
    laddie626 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2008, 02:08 PM
    Motor wiring
    I have replace a seized up motor this weekend. Motor would not run. Talked to a HVAC man who lives far away, explained the board is shot.

    Today I replaced the rodgers-white circuit board.

    Need help in connecting the motor wires. The two brown are connected to the capacitor.

    Black to cool-H red to park and blue to park. Yellow to cir.

    Fan comes on when I turn it on. Shuts off when I try to run the air conditioner. Haven't tried the heat yet. It's 110 out side. Are these the correct way or Did I do something wrong.

    I get a steady flashing light from the board indicating everything is fine.

    This is for a trane unit model#tue060a936ko
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 21, 2008, 02:17 PM
    Read the papers that came with the new board. Usually they are packed with the board because the boards are updated all the time and wiring can change.

    See page 11 below and read the notes


    http://www.aireng.com/clientuploads/...urnace/tue.pdf
    laddie626's Avatar
    laddie626 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 21, 2008, 02:21 PM
    One more thing. I was told by the supply store that the Yellow wire would replace the white wire from my old motor. Is this correct or do I follow the colors on the diagram you linked me to.

    Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jul 21, 2008, 02:24 PM
    That is hard to tell and it is possible. Read the side of the motor. They all have a diagram. I am not there to look at the situation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fab Motor Wiring [ 6 Answers ]

This is almost a redundant question but not quite. My old motor had 3-wires, black to contactor, brown to capacitor, purple to DF2 on circuit board. The old capacitor only has one spade terminal for fan, but four for herm and common. They said to wire-nut brown/white wire, connect black to...

Fan motor wiring [ 2 Answers ]

The model is Carrier 42JS012. Can anyone tell the air-cond fan motor wiring? The are 5 wires which is Red, Yellow, Blue, Black and White. Which wire is connected to the capacitor and which is connected to fan speed? Thanks

Motor wiring? [ 2 Answers ]

I have a new GE commercial motor model # 5KC35JNA489Y, 115v to replace the one on a metal lathe. It has 5 wires, purple, blue, black, white and yellow.. there is a separate switch for forward and reverse.. I'm not sure how to wire this.. any help would be very appreciated

Motor wiring? [ 4 Answers ]

:mad: Perhaps someone here can help me, I bought a small GE 120v electric motor for a replacement for a machine. It has 3 three wires (red, yellow,blue) and requires a 10mf capacitor. My best guess was to wire it with Blue to line , red-line & cap, and yellow on the other cap term. But it runs very...

Wiring new fan motor [ 10 Answers ]

Just bought a new fan motor for my a/c & it has one more wire than my old one did. Need help installing.

View more questions Search