Ask Experts Questions for FREE Help !
Ask
    gofiga's Avatar
    gofiga Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2008, 02:11 AM
    Heat pump thermostat
    have a hpt 18 -60 heat pump thermostat with 8 leadsY,g,r,o,w,blk,blue,brown comming from blower and y,gr,o,w2,e,c on thermostat how do i wire it up
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 6, 2008, 04:32 AM
    Follow the directions that came with the no brand name and no model number thermostat. There is also a wiring diagram on the blower door on the inside no brand name unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

AC heat pump thermostat [ 2 Answers ]

Hi, I have a ac/heat pump unit, that lately is acting like it is possessed. We will turn it on one time and everything will work just fine. But then after we turn it off for awhile when we turn it back on the unit outside will start up, but the blower inside won't work. If you then turn it off...

Heat Pump Thermostat [ 1 Answers ]

Thermostat for my heat pump system in my home has died. I think that some heat pumps energize the reversing valve in heat mode and some energize the reversing valve in cooling mode. Question is : "When replacing a thermostat for a heat pump how can you tell which type of system you have and does it...

Heat pump thermostat Aux. Light is going on when no resistance heat used. [ 2 Answers ]

I have a Maple Chase SaverStat thermostat on a Lenox heat pump. The thermostat and heat pump are ten years old. Recently when the heat pump comes on the Aux. light on the thermostat also goes on (not the emergency heat light). I have checked and the auxiliary heat strips and they are not heating...

View more questions Search