Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rotating Toilet 90 degrees on Cast Iron Flange
[ 1 Answers ]
I am remodeling a bathroom in a 60s vintage home with adequated crawl space. I need to rotate the toilet flange 90 degrees to install the new toilet as the orientation has changed with the remodel. The materials of construction for plumbing is cast iron. I am keeping the same elevation of floor....
Toilet , 4" pvc to 3" cast
[ 4 Answers ]
I have a home with a basement and problems with a toilet on the first floor. I had to repair the floor because the old cast flange was leaking. I cut out The flange and around 4 foot of old cast 3" pipe. I repaired the floor and used a 4" pvc flange and 4" pvc pipe with a 4"to3" rubber boot to...
Cast Iron Toilet Flange Problems
[ 3 Answers ]
Hi, I have read forums on having the cast iron toilet flange being too high after tile removal. I have some additional questions on this: 1. After removing the Thick set Mortar, the flange is 1 " above the subfloor. Can I just add different types of underlayment to reach the flange (i.e....
Join 4" PVC to Cast Iron Hub
[ 2 Answers ]
I am re-routing the main sewer line that goes through the basement/crawl space of my 70+ year old house. Simply put, there are too many re-plumbs, new lines, and/or patches by previous generations. In the next months, a new kitchen and bathroom downstairs are going to cut into this patchwork 2...
Shower flange"cast iron"
[ 3 Answers ]
I have a stand alone shower on a slab foundation that leaked I pulled the floor out and the cast iron flange for the liner is in bad shape and needs to be replaced. How do I go about this and where do I get the parts. View more questions Search
|