Ask Experts Questions for FREE Help !
Ask
    southport9's Avatar
    southport9 Posts: 2, Reputation: 1
    New Member
     
    #1

    May 17, 2008, 12:15 PM
    Fire alarm
    What is the principle difference between class A and class B fire alarm wiring
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    May 17, 2008, 01:22 PM
    http://www.homecontrols.com/homecont...CTE_wiring.pdf
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    May 17, 2008, 06:48 PM
    Fire Department use "A" (material fire > water) : "B" (Electrical Fire > Non liquid suppression) : and "C" (Chemical >Foam) to describe the type of fire to expect and what to use to kill the fire.

    NEC 725 defines Class I, II and III alarm systems.

    Given the above, what is your question?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #4

    May 17, 2008, 07:20 PM
    Hey Don, if you check my link, it answers the OP's post.

    You answered it by forgetting to place yourself in the right world first. The guy that's been an auto mechanic who knows that RED is POSITIVE comes across thermocouples and doesn't know that RED is always connected to NEGATIVE.

    Or the EE that learned that BLACK is NEGATIVE puts on his electrician's hat and doesn't realize that BLACK is HOT.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #5

    May 17, 2008, 07:29 PM
    Ron,

    You lost me but that's easy to this evening.

    How did you make the leap from his generic question to the instruction pamphlet furnished by your link?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #6

    May 17, 2008, 08:33 PM
    Option #2: Class B (Style B) Wiring
    (Extra wires, no extra zones)
    The 449CTE, CSTE, and 448CTE can be used
    For every smoke detector on a class B loop, by
    running all the supervisory relay outputs to the
    end of the line
    . This way, a trouble signal will
    Break the loop only at the very end, and it will
    Not prevent any other smoke detector from
    Signaling an alarm. No added power supervision
    Unit is needed.

    Option #3: Class A (Style D) Wiring
    (No extra wires, no extra zones)
    When Class A wiring is used, the 449CTE,
    CSTE, and 448CTE can be used for every
    Smoke detector on the loop without having to
    Run the supervisory wires to the end of the line.
    The supervisory relay output is simply connected
    in series with the alarm loop at every
    detector
    . With Class A wiring, a break in the
    Alarm loop will not prevent other smoke
    Detectors from signaling an alarm, since the
    Loop is bi-directional. No added power supervision
    Unit is needed.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #8

    May 18, 2008, 11:52 AM
    Redundancy is main benefit of Class "A". For Life Safety, extra wiring is a small price to pay for a home system. Large Buildings get involved.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Smoke / Fire Alarm in Kitchen [ 4 Answers ]

Hi. One of the smartest things I did in my addition / remodel project was to install hardwired, interconnected smoke / CO detectors throughout the house. One of the dumbest things I did was put one in my kitchen. Naturally it goes off anytime the oven is used. If I move the kitchen (1st...

Water dripping through fire alarm units in the ceiling on 1st and 2 and floors [ 3 Answers ]

Hi, I have a very strange problem in my house. Ever since temperature in Chicago have plunged to single digits, I started noticing that there is water dripping down through my Fire Alarm units on both floors. I am not sure if its connected to cold weather, but this is when its happening. I...

Alarm goes off but not because of smoke [ 6 Answers ]

the smoke detector alarm goes off but its not because of smoke. What could be the other probable reasons? Is condensation a probability? Is getting a central humidifier going to solve the problem? What would be a good route to take?

Smoke Alarm [ 1 Answers ]

We have a smoke alarm direct wired into the house. It continues to chirp periodically. What causes this and how can we make it stop? Its wired not battery operated so its not a dead battery. Thanks, Eric

Fire Alarm [ 1 Answers ]

Hello, About 3 days ago, a new fire alarm was installed in my condo unit. In the process, the technician turned off the breaker for the central AC unit. Yesterday I decided to turn on my air conditioner (the breaker was still off). I noticed that the guy turned off the breaker while the AC was...


View more questions Search