11.5 to 11 hp briggs

freshback Posts: 1, Reputation: 1

New Member

May 10, 2008, 12:40 PM

11.5 to 11 hp briggs

Will an alternator and armature from a 11.5 briggs mdl#28T707 type 1154 fit on a 11hp briggs mdl#252707 type 0130?

MOWERMAN2468 Posts: 3,214, Reputation: 243

Ultra Member

May 14, 2008, 05:14 AM

It should.

Add your answer here.

Check out some similar questions!

14/hp briggs [ 2 Answers ]

Hi i am trying to repair a 14/ hp briggs motor. This motor has ohv where i have never had a chance to work on i am from old school and not used to this newer equipment. Here is the problem first he carb was overflowing with gas i took it apart and cleaned everything with parts cleaner and hoped i...

12.5 briggs [ 1 Answers ]

I have a 11hp rear engine snapper. The motor shut down on me so I took it off and replaced with a 12.5hp. The only 2 wires the 11hp had was a starter wire and another that went inside the lid. This 12.5hp has those 2 wires plus 2 more that are both coming out of the side together in the same...

18.5 HP Briggs [ 5 Answers ]

Hello everyone, I have a Craftsman lawn mower with a 18.5 Briggs single cylinder that will not crank over. Have replaced the starter with a new one and it still does not crank over. Someone suggested checking the values and the valves were a little off so we fixed them. Sometimes it will...

10 hp briggs and stratton [ 1 Answers ]

I need to know what the intake and exhaust valve setting for a briggs and stratton generator. Thank you :(

Briggs and Stratton 10 hp [ 1 Answers ]

Can some one help me I need to know what valve setting to set on my briggs stratton generator. Thank you for you help