Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Neutral wire used as a ground?
[ 3 Answers ]
I have been changing switches and plugs and in one of the receptical boxes I found the neutral wire pigtailed to the side of the box, and when I installed the new receptical there was no circuit until I did the same, pigtailed to the box... is this safe?:confused:
Is it okay to use bare wire as neutral? Okay to share ground?
[ 53 Answers ]
Our house was built in 2003 and it came with a GE 24" microwave oven that uses 120 volts/20 Amp. The microwave stops working so we went out and bought a KitchenAid convection microwave oven that requires 20 Amp, 240 volts, 60 Hertz. The old microwave oven uses 12/2 w/g romex from a subpanel. ...
Can you use Metal Conduit as ground to convert 2 wire to 3 wire?
[ 3 Answers ]
I need to convert an old cinder block house from 2 wire outlets to 3 wire by adding a ground to all outlets. Since the entire house is cinder block, all the circuits from the basement breaker box are in flexible metal conduit and metal outlet boxes... Is it possible to use the metal conduit...
Neutral wire needed
[ 11 Answers ]
Hello. I just purchased 4 SPST LED rocker switches the other day. I am using a computer power supply to power the switches by paperclipping the 3rd (black-ground wire) and 4th (green-PS on) wires. My problem is that the LED does not light because (I am told) I need a white neutral wire to connect...
Neutral wire is hot(has voltage potential like the black wire)
[ 5 Answers ]
Hi, The problem started at midnight last week. One of my line in the basement is starting to have issue whenever I connect a water pump or appliances to the outlets. Before I plug the appliance in, the neutral is neutral(zero voltage), but when I plug the appliance in, the neutral is now... View more questions Search
|