Ask Experts Questions for FREE Help !
Ask
    minksdzine's Avatar
    minksdzine Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 8, 2006, 10:46 PM
    Corian refinishing
    My Corian countertops are scratched, and I wanted to refinish them. Any ideas? (By the way, just tried a palm sander with 400 grit paper on one, and was left with sander marks and dull finish) thanks for any help.

Check out some similar questions!

Need to splice corian pieces together [ 4 Answers ]

Hi, I have several pieces of corian window sills , and I need some good info on spicing them together to make one long one , can I biscut join them? could I dowel them? any info would be appreciated , and will I have to refinish the top to hide the seams or splices?? I've worked consrtuction for...

Corian counters [ 3 Answers ]

What is the correct tool to use for cutting a corian counter, to keep a smooth edge? Thanks

Unfinished corian [ 4 Answers ]

I want to buy a length of corian but want it to be unfinished.In its raw state so that I can finish it and not pay someone else to do it.Anyone have a clue what it runs for say a 5 foot length of this 30 inches wide.

Corian finishing [ 1 Answers ]

I have just sanded my corian counter tops after nine years use, and scratches came out nicely but it left a satin dull finish( I used 330 wet/dry) and some sander marks. Is there some polishing I need to do to the surface if so with what?

Corian Counter [ 2 Answers ]

What tool would you use to cut Corian? I have a piece from an old kitchen counter that I want to cut into a 20"x20" cutting board. It is about 3/4" thick and the longest cut I have to make is about 24". Thanks

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.