Ask Experts Questions for FREE Help !
Ask
    mssthang268's Avatar
    mssthang268 Posts: 3, Reputation: 2
    New Member
    		  
    #1

    Feb 6, 2006, 04:57 PM
    Washer tub
    I recently put in a new sink for my washing machine and thought I hooked everything up all right but the grey pipe with the little small white thing on it going from my hot water tap to the hot water pipe is leaking as well is the cold am I missing something or am I supposed to glue them together. Thank you erica oh bye the way that's the old bolt your looking at I can't seem to fit the new one on without it leaking.
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Feb 7, 2006, 12:21 PM
    No, you don't have to glue anything. This is a compression filling. Cranking down harder might do it, but if it don't give the ferule,(the little small white thing) a few wraps of teflon tape and try again. Good luck, Tom
    mssthang268's Avatar
    mssthang268 Posts: 3, Reputation: 2
    New Member
    		  
    #3

    Feb 7, 2006, 09:34 PM
    Oh my gosh that worked I went to home depot he gave me some plumbers tape wrapped that little sucker and all went well thanks for the advice.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Determining Age of washer [ 2 Answers ]

Hi! Was curious if there is a way to determine manufacture date on washer & dryer by the model, serial or stock numbers on the equipment. They are KitchenAids. Thanks. Sandi

Maytag Washer [ 2 Answers ]

Maytag washer model #LAT8006AAE jumps around as if is out of balance, even on small loads. Any idea as to what causes this? It is level. Thanks

Smell behind washer [ 1 Answers ]

Hi I'm new here and I've recently started to have a smell behind my washer. At first I was told it was sweage smell but was later told it was stall urine.(I don't want either one). The smell seemed to be coming from the pipe that the washer discharges water into. Behind the washer I have...

Vibrating Washer [ 3 Answers ]

Hi, I have a Whirlpool Duet washing machine on the third floor of my A-frame house. Great machine, but when it goes on spin cycle, the whole house vibrates. It's worse on high, but happens on medium and low as well. We want it to run on high to spin out as much water as possible. Is there...

My washer... My washer... OH! My washer... [ 1 Answers ]

Dear all, I have a Kenmore Sensor Smart washer Three Speed... Automatic... with Catalyst... that It is with us since we bought the house (19 months ago... ). Today, it decided not to work... It can fill with water but sometimes it doen´t wash the clothes (the tub is not moving) and sometimes it...

View more questions Search