Ask Experts Questions for FREE Help !
Ask
    pulsecnc's Avatar
    pulsecnc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2008, 08:01 PM
    High leg 3 phase
    I have a cnc lathe and I am not sure where to hook up the high leg on the 3 phase. Can anyone help me.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Mar 17, 2008, 08:17 PM
    I would have an electrician come out and do this.
    Three phase work is NOT a "do it yourself" kind of thing.
    wcoyle's Avatar
    wcoyle Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Apr 24, 2008, 07:34 PM
    Outside legs determine rotation
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Apr 24, 2008, 08:08 PM
    Quote Originally Posted by wcoyle
    outside legs determine rotation
    HUH??
    Washington1's Avatar
    Washington1 Posts: 798, Reputation: 36
    Senior Member
    		  
    #5

    Apr 25, 2008, 01:07 PM
    Quote Originally Posted by stanfortyman
    I would have an electrician come out and do this.
    Three phase work is NOT a "do it yourself" kind of thing.
    I agree!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Difference between single phase and 3-phase motors [ 4 Answers ]

Difference between single phase and 3-phase motors

Change a 3 phase flat top to single phase [ 2 Answers ]

My wife's church recently purchased a used commercial 3 phase griddle(flat top). How can it be wired to use single phase 220/240 V. It's on a 60 AMP breaker.

208 volt3 phase why to single phase 120 volt [ 4 Answers ]

Supply is from 75 kva transformer, 3 phase delta /y three wire feeding a 30 amp breaker. 100 feet down stream is a junction box that I want to tap and produce a 120 v single phase ( 20 amp CB) supply. The junction box feeds a 6 amp motor

Simulization with shorting 2 Phase of three phase systen [ 4 Answers ]

How I will be able to design a system which will not effect to our main supply of source when we short two phases of a three phase electrical system.any how is it possible to isolate mains supply with the system phase shorting effect.

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping

View more questions Search