Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Turning Water back on for bathroom sink
[ 1 Answers ]
I had a clog in the pipes under my bathroom sink. I shut off the hot and cold water valves before removing the pipes (just in case someone accidentally turned the water on while working). I ended up replacing the pipes and got everything set up. I turned the water valves back on but, when I turn...
Installing new pop up drain in bathroom sink
[ 2 Answers ]
We are installing new pop up drains (the kind you push down on to close and open) on new sinks without overflow. The drain part sticks up about an eighth of an inch from the sink so after it drains there is always a little pool of water around the drain. The drain came with two rubber washers, one...
Reduced pressure after turning on faucet
[ 1 Answers ]
I am trying to figure out why I have reduced pressure from my kitchen sink faucet. Initially, when I turn on the faucet, either hot or cold, the pressure is good for about two seconds, after that it reduces by approximately half. I have replaced the seat and springs but that only eliminated a drip....
Banging/Tapping Noise when turning on faucet/flushing toilet
[ 3 Answers ]
Hi guys! In addition to my little problem with my toilet posted in another thread (can fix it easily), I have another issue. Every time I use the upstairs shower/toilets/sink, when running water, a loud banging/tapping noise appears. When you turn it off, the banging noise still appears...
Turning off water for faucet replacement
[ 4 Answers ]
My husband attempted the rather easy job of replacing a kitchen faucet. After turning off water supply, water continues to dribble out of faucet.. He says there some problem in turn off valve. How does he replace valve if water is running out of the faucet? We DO have a well for water supply. View more questions Search
|