Ask Experts Questions for FREE Help !
Ask
    sjkernahan's Avatar
    sjkernahan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2008, 05:38 PM
    Convert outlet from 110 15 amp to 110 20 amp
    How can we convert a 110 15 amp outlet to a 110 20 amp outlet. Can we just attach the faceplate for the 110 20 amp outlet. We are installing a hot sauna. Thank you.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Feb 26, 2008, 05:52 PM
    Does this sauna require a dedicated circuit? If it requires a 20A receptacle I am sure it will be a HEAVY draw.

    You can replace the receptacle with a 20A version IF it is wired with #12 wire and is on a 20A breaker. Be careful doing this for the reason mentioned above.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert 220 line to 110 [ 4 Answers ]

I have a 220 line feeding a small 2 breaker sub in my garage; I no longer need the 220. Is it OK for me to then to use each leg and share the neutral to run 2 110 lines or replace the 220 sub with a smaller 110 sub? Also it is bx so the housing is connected to ground.

220 range, 110 outlet [ 4 Answers ]

I have recently acquired a range that has 220 plug - the breaker box shows a double 30 amp - can I assume that that is for a range or can I convert a 110 outlet to a 220 or are there ranges that are 110. Help!

12 Gage wire 110 outlet [ 1 Answers ]

What amp breaker should I use for a out side 110 outlet using 12 gage wire.Used for plugging in vacuum cleaner to clean cars.

110 v outlet off a 220 while maintaining 220v for a water pump [ 2 Answers ]

I have a 10-2 with ground 220 line to a water pump with no access to a 110 circuit. I need to install a 110 circuit to run a lights in the pumphouse. Can I do this by using a 1 hot lead and the ground wire as neutral to get the 110 power and then pound a ground stake in and connect the 110 ground...

110 outlet stops working, NOT tripping any circuit breaker. [ 1 Answers ]

I have a 220 outlet three feet from a 110 outlet. When I am using a clothes washer on the 110, it goes dead after a while (10-30 minutes). No breaker is tripped. When I turn on the 220 clothes dryer, the 110 washer restarts from where it left off.

View more questions Search