 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
16 hp b & s vanguard eng
I have billy goat leaf vac with a 16 hp briggs vanguard ohc motor.. there is no oil pressure switch and by passed all safety features. Motor ran for about 10 sec. then crapped out now I get no spark, I cleaned and reset the magnetos and fly wheel and rewired the harness any help would be apreaciated
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a simplicity mower (1998) with a 16hp vertical shaft vanguard v-twin engine (303777 1111-51). Yesterday, after running the mower with turbo bagger attachment (a little extra load on the engine), for about 20 minutes, I idled back the engine and it began belching large clouds of blue/white...
I have a 16.5 briggs & strattion garden tractor when trying to start the engine it is very hard to spin over ,you have to keep turning starter switch to get to spinning fast enough to start . I have tried two new batteries cleaned all connections and terminals replaced starter, wondered if there is...
Need specs, mainly oil capacity.
Hello all, I have a this 16 HP Vanguard motor that came on a Dosko stump grinder. My problem is that the fuel will weep into the block and fill my cylinders. It also drips out of some sort of metal intake line that has nothing attached to it. This intake does suck air as it will kill the engine if...
Hi My 16HP B&S Vanguard V Twin won't start. There was a thing with wires at the bottom of the carb, but when removing the carb to check for a blockage, the wire snapped off. However, this does not seem to prevent the float chamber filling with fuel. There is fuel being pumbed from the fuel pump...
View more questions Search
|
