Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace Thermostat Near Heat Duct
[ 2 Answers ]
I live in an older home (1928). The furnace thermostat is mounted to a wall which also carries a heat duct to the second floor. The wall surface is warm during the heating season and I think this radiant heat is affecting the thermostat. Is there a way to shield the stat to minimize the heat...
New thermostat, Furnace ignites fire but no heat
[ 3 Answers ]
Hi My furnace and thermostat was working fine until two weeks ago. So I replaced the thermostat and the heat started working for the first day then it stopped. I tried to turn up the degrees on the thermostat and I checked the furnace. The electric ignitor was working fine and there was fire...
Heil Furnace - No response when calling for heat
[ 3 Answers ]
I have a 5 year old 90% efficient Heil Furnace. I get no response when I call for heat. (the "blower only" setting works fine.) I have confirmed that it is not the thermostat and that the fan control board has power. The gas valve light pulsates to indicate that it is OK. The lead that goes to the...
Honeywell Thermostat Furnace heat not on
[ 2 Answers ]
Hi, We installed a new Honeywell Deluxe 5-2 Programmable Thermostat (RTH6300B) last week. We have a Carrier Furnace that is 15 years old, I believe. We've noticed that the temperature of our house doesn't seem to be reaching the temperature it's set for but have been so busy and out so much...
Honeywell thermostat heat/cool in Rheem 2 stage furnace?
[ 1 Answers ]
I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the... View more questions Search
|