Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Closet Flange Height
[ 1 Answers ]
I've installed a few toilets and I always get different answers from different sources on this. Should the toilet flange be at the same height as the surrounding floor level or should it be slightly above, or.. Does it matter? Thanks, Jesse
Closet flange repair
[ 4 Answers ]
Hello I sure could use your opinion. I have tiled the bathroom floor and the closet flange is broken on both sides. The flange repair tabs will not go under the broken flange. I was thinking of screwing the repair flanges over the top of the broken one and into the concrete. Then use an extended...
Closet flange install
[ 1 Answers ]
I have a two-part question on installing a closet flange. My house is a mid-60’s split-level and I replaced all the copper DWV with PVC. The main drain is 3” and I used a 4” to 3” closet ell. I had to remove the old flooring down to the joists, replace with new plywood, and cut holes for the ell...
Broken PVC closet flange
[ 9 Answers ]
Hi, Can any one help me?. My basement had a minor flood and as I was tearing out the sub floor I accidentally broke off the toilet flange. The flange was cleanly broken off with the remaining tail piece still glued in the drain pipe. The ID of the broken off piece is 3 3/8". I cannot find a...
Closet Flange
[ 12 Answers ]
I have seen quite a few questions regarding closet flanges but not exactly what I have going on. The toilet in my first floor bathroom has been leaking from the base so I decided to take the opportunity to update the entire bathroom. After removing the toilet I was shocked to find no closet... View more questions Search
|