Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cooker plate is too hot
[ 4 Answers ]
Dear All, I have an electronic cooker plate (hob) installed (Candy PVS 640 RX). The problem is that when I cook on it, I can't adjust it's heat, or it is very-very fast. In theory it could be adjusted ungradually. Any idea? Is it a failure at all? Thank you in advance, Peter
Cooker point extension
[ 4 Answers ]
Hello all, first time here so be gentle please. If, say, we had a cooker plate and switch in the wrong place and wanted to move them about 1 metre. Can we extend the cabling, or do we need to go back to the consumer unit with one continuous run? The former would be the easiest by far,...
Rice Cooker
[ 1 Answers ]
Hi I have a National Rice Cooker Model SR-GE18N, Last week , the displace show (H3),and all function stop, seems have some code to lock all functon, I worder any body have the same problem or any solution. Thanks
Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c
[ 1 Answers ]
Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading
High pressure at sink, low pressure at shower
[ 2 Answers ]
Hello, My sink in the bathroom has good solid water pressure. Next in the circuit is the toilet, which also has good pressure at the angle valve. The shower, however has terrible pressure. I have removed the head, and the pressure out of the shower neck is no better. Shower neck exits the... View more questions Search
|