Ask Experts Questions for FREE Help !
Ask
    person_ml's Avatar
    person_ml Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2008, 04:18 PM
    What if your blower motor is no good after you jumped started it and it is still making a loud noise and hesitate to turn?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Feb 2, 2008, 09:45 AM
    Time to replace,, buy,have you checkec the start capicator 1st, this could maybe cause a hesitation in starting,, or no start at all
    tsa7man's Avatar
    tsa7man Posts: 154, Reputation: 9
    Junior Member
    		  
    #3

    Feb 2, 2008, 08:08 PM
    Could be a bad capacitor...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor [ 1 Answers ]

I have a Coleman airhandler which is about eleven years old. I had a new Nordyne heatpump installed about a year and a half ago. It worked fine until a month ago, now the blower will only go off when the breaker is turned off. The thermostat has no effect on it, however the a/c cycles fine. Could...

Blower motor going off [ 6 Answers ]

I just replaced the blower motor because the a/c guy said it was bad and was going to charge me $420 to fix it so id id it myself. I got another motor, the old one was 4 spd 960 rpms, and the new one is 3 spd with 1075 rpms, the people said it was okay to do it like that and got a new capacitor as...

Blower motor [ 2 Answers ]

My blower motor won't stop running . Heat or A/C compresor won't turn on. Tapped on relay still don't shut off. It is a Carrier model#58GS100-2 please help hott in here. Thanks

Blower motor [ 2 Answers ]

How do you install blower motor in a gas furnace?

Blower motor [ 1 Answers ]

THere is no air blowing when the heat is on. The furnace does come on but no air blows. If I turn the heat off and manually turn the fan on the air blows. If I leave the fan switch in the on position and turn the heat on the air stops.

View more questions Search