Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Motion Sensing Wall Switch causes flickering lights
[ 4 Answers ]
I just bought a Cooper Motion sensing wall switch. I wired it (correctly?) and I am getting flickering lights when the switch automatically turns itself off. I have good lights in the "on" positions, and when I turn the lights off there is no flicker. However, when the "motion" stops, the light...
Wiring circuits with smokes & lights
[ 1 Answers ]
I am building my basement right now and have been reading about wiring and circuits. I thought I had everything figured out for my basement until I started looking into my lighting circuit today. I had a circuit that I thought I could easily add to, to handle my needs. I will be adding three...
Wiring for multiple light switches
[ 3 Answers ]
I have three light switches that control one light fixture. In the past, they all turned the light of and on independently. But recently it depends on where you turn if off. In some cases, it won't turn on at another switch. Someone told me it was the wiring or the switches. Nobody has changed...
Wiring question 14awg and Cabinet lights
[ 3 Answers ]
I had an electrician install some under cabinet puck lights. The puck lights were a last minute addition to the recessed lights he installed. After watching him install the recessed lights I thought it looked easy so I put some more in myself in another room. I got all kind of books and read...
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|