 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
You shouldn't have to do the measuring. The installer is probably better at that.
If you intend to buy a used shell, measure width for both the inner lip and the outer edge. Then measure from the inner edge of the front to the tail gate. The shell or cap should fit onto the middle of the bed rail and the gate should latch securely when the cap is closed and locked. Buying used is risky and may require a test fit before buying. You may also want to use sealing tape between shell/cap/topper when installing. I hope this helps. |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Camper Roof Repair
[ 1 Answers ]
I need tips on replacing a rubber roof on a camper. The wood is rotten and the rubber is badly cracked.
Having trouble with a camper heater
[ 1 Answers ]
W have a suburban camper heater. Sometimes it will ignite and work but sometimes it won't. We have had a repairman out here many times that seem to fix it and then it does it again... HELP:(
What's a good way to clean mildew off the canvas on my pop-up camper?
[ 4 Answers ]
My newly purchased used pop-up camper has quite a bit of mildew on the canvas. Know of any tried and true methods for cleaning it off? Thanks!
1986 El Paso Camper
[ 1 Answers ]
My mother has a camper and needs to run wire from where the AC is. She tells me that the wire that is there now is for an air conditioner and she needs to down size the wire to a 12 volt wire. Problem is we have no idea how to do this. I told her I believe that if the wire in place now holds so...
View more questions Search
|
