Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changed over from White Rodgers Thermostat to Honeywell thermostat
[ 3 Answers ]
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...
Changing over from White Rodgers Thermostat to Honeywell thermostat
[ 3 Answers ]
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...
System does not react to thermostat, thermostat set to off, AC still runs.
[ 3 Answers ]
We had a new AC system put in this summer. I turned it off as the weather moderated, but even though the thermostat is set to off, the AC runs. It also looks like the heat does not run. It was chilly last night and I turned the thermostat to heat on and set the temperature appopriately, but no...
Replacing Analog Thermostat with Non-Programmable Digital Thermostat
[ 1 Answers ]
Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!
Hooking up a new thermostat but old thermostat has a white and a black wire?
[ 2 Answers ]
Everything I look at indicates a white and red wire for the connecting wires. Our thermostat is probably original to our home (1943). It has two wires. It is difficult to tell but it looks like one is a white wire and the other is black. I've tried looking on the internet for some info however... View more questions Search
|