Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Running in wall Coaxial Cable from Existing wall
[ 7 Answers ]
Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my...
How to support a load bearing wall, need engineer, cement wall
[ 3 Answers ]
I want to remove about 6 feet from an interior wall. The rafters run parallel with the wall but the reason I think it's load-bearing is because one of the trusses rests on the middle of the wall with a lateral x across it. I have existing pictures and a drawing of "the existing" and what is...
Installing half wall in load bearing wall
[ 3 Answers ]
We are attempting to make our kitchen open concept with our living/dining room by creating either a half wall or putting in a window (what is the correct name for that?) The wall is load bearing. Do we need a permit for that type of reno? What would be a realistic budget to set aside for that...
Hampton bay fan came with wall remote but Fan is not operated from a wall switch.
[ 1 Answers ]
I received a New Hampton Bay fan to replace an existing fan. The existing fan is operated by two pull chains. The new fan came with a wall control device. The problem is that the fan is not operated from the wall switch and there are no pull chains. Can I use a Hampton Bay remote with the... View more questions Search
|