Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a second shower head to shower stall
[ 4 Answers ]
I'm trying to add a second shower head to a shower stall in the basement. What do I need to do to make sure an equal supply of water at the same temperature runs to both heads. I tried to just run a line from the first shower head to the next but that doesn't work.
Narrow Shower Pan/Shower Stall
[ 1 Answers ]
Where I can purchase a shower pan/stall approximately 30" wide by 60"? There isn't sufficient clearance adjacent to the toilet to us a 34" width which is available everywhere?
Shower stall
[ 2 Answers ]
I am building a ceramic shower stall from scrach. We are instaling a custom made glass door . My question is when I am buiding the threshold under the door should it have a slight slope to the inside. It is going to be aprox 4" wide. Also should the threshlold be made by stacking 2x4s or should...
Shower stall need height of controls and shower head
[ 1 Answers ]
Hi Am building a shower and require the height of the taps and the shower head
Turning walking shower stall into bathtub/shower combo.
[ 4 Answers ]
Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line... View more questions Search
|